Snap-in Imaging Cannula with Fluid Injection
Snap-in Imaging Cannula with Fluid Injection
Voici une description courte popur vouir ce que ca donne seulement... Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor
The Snap-in Imaging Cannula with Fluid Injection has two parallel implants, a GRIN lens for deep-brain imaging, and a fluid channel for liquid injection near the imaging site. The fluid injector is removable to allow for multiple injections.
The Snap-in Imaging Cannula with Fluid Injection is compatible with the following microscopes:
- Snap-in 1-color Fluorescence Microscope Bodies Model L (SFMB, OSFM)
- 2-color Fluorescence Microscope Bodies Model L (2CFM)
Notes:
• The Fluid Injector for the Multiple Fluid Injections Cannulas must be ordered separately.
• A 2-meter length of polyethylene tubing is sold separately to connect a fluid delivery system to the cannula (PT_OFC_2).
• Each Snap-in Imaging Cannula with Fluid Injection is provided with one of each of the five models of Protrusion Adjustment Rings Model L. If more rings are needed, a set can be purchased separately (PARS_L).
| GRIN lens channel | ||
|---|---|---|
| GRIN lens numerical aperture | 0.5 | |
| Working distance | 80 µm | |
| Penetration depth |
- Type D: 0 - 3.2 mm - Type V: 3.0 - 5.6 mm - Type E: 5.3 - 8.0 mm |
|
| Diameter | 500 µm | |
| Fluid injection channel | ||
| Injector ID/OD: | 100/170 µm | |
| Guiding tube ID/OD: |
300/410 µm | |
| Guiding tube protrusion: | 500 µm shorter than the GRIN lens | |
| Plug diameter: |
195 µm | |
| Plug protrusion: | 50 µm longer than the guiding tube | |
| Fluid connector: | 1.25 mm ferrule | |
| Injector Dead Volume | Glass | 8 nL/mm fiber length* |
| Polyimide | 15.4 nL/mm fiber length* | |
-
The Snap-in Imaging Cannula with Fluid Injection has two parallel implants, a GRIN lens for deep-brain imaging, and a fluid channel for liquid injection near the imaging site. The fluid injector is removable to allow for multiple injections.
The Snap-in Imaging Cannula with Fluid Injection is compatible with the following microscopes:
- Snap-in 1-color Fluorescence Microscope Bodies Model L (SFMB, OSFM)
- 2-color Fluorescence Microscope Bodies Model L (2CFM)
Notes:
• The Fluid Injector for the Multiple Fluid Injections Cannulas must be ordered separately.
• A 2-meter length of polyethylene tubing is sold separately to connect a fluid delivery system to the cannula (PT_OFC_2).
• Each Snap-in Imaging Cannula with Fluid Injection is provided with one of each of the five models of Protrusion Adjustment Rings Model L. If more rings are needed, a set can be purchased separately (PARS_L).
-
* fiber length could be find at the end of the Ordering code of the injectorGRIN lens channel GRIN lens numerical aperture 0.5 Working distance 80 µm Penetration depth - Type D: 0 - 3.2 mm
- Type V: 3.0 - 5.6 mm
- Type E: 5.3 - 8.0 mmDiameter 500 µm Fluid injection channel Injector ID/OD: 100/170 µm Guiding tube ID/OD:
300/410 µm Guiding tube protrusion: 500 µm shorter than the GRIN lens Plug diameter:
195 µm Plug protrusion: 50 µm longer than the guiding tube Fluid connector: 1.25 mm ferrule Injector Dead Volume Glass 8 nL/mm fiber length* Polyimide 15.4 nL/mm fiber length* -
Drawing Snap-in Imaging Cannula with Fluid Injection
Application NoteFrEn Imaging Cannula Implantation & Single-color Microscope Installation