Low-Autofluorescence Bundle Branching Fiber-optic Patch Cord
Low-Autofluorescence Bundle Branching Fiber-optic Patch Cord
Voici une description courte popur vouir ce que ca donne seulement... Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor
The Low Autofluorescence Bundle Branching Fiber-optic Patch Cord has two or more optical fibers bundled into a single optical connector on one end and individual connectors for each fiber on the other end. It uses low autofluorescence materials and black epoxy to prevent the signal crosstalk between the optical fibers. These patch cords are primarily used in multi-site fiber photometry.
Before delivery, each patch cord undergoes a photobleaching process that further decreases its natural fluorescence.
Please note that there may be some limitations on the choice of optical fiber, connector type, or the number of branches.
| Core (μm) |
Cladding (μm) |
Buffer | NA | Fiber-optic Code* |
| 200 | 220 | 245 | 0.37 | 200/220/XXX-0.37 |
| 200 | 230 | 500 | 0.57 | 200/230/XXX-0.57 |
| 400 | 440 | 470 | 0.37 | 400/440/XXX-0.37 |
| 400 | 430 | 730 |
0.57 | 400/430/XXX-0.57 |
*XXX is representative of the jacket code, see the JACKETS CODE tab to choose the best one for your needs
| Description | Product | Termination Code |
| FC Connector with Zirconia Ferrule FC Connector with Metal Ferrule |
 |
FC FCM |
| SMA Connector with Metal Ferrule |  |
SMA |
| Zirconia Ferrule OD 1.25 mm |  |
ZF1.25 |
| Zirconia Ferrule OD = 1.25 mm with Flange |
 |
ZF1.25(F) |
| Zirconia Ferrule OD = 1.25 mm with Peek Flange | ZF1.25(FP) | |
| Zirconia Ferrule OD = 1.25 mm with Reduced Flange 1.6 mm |
ZF1.25(RF) | |
| Metal Ferrule OD 1.25 mm |  |
MF1.25 |
| Metal Ferrule OD 1.25 mm with Flange |  |
MF1.25(F) |
| Zirconia Ferrule OD = 2.5 mm |  |
ZF2.5 |
| Zirconia Ferrule OD = 2.5 mm with Flange Zirconia Ferrule OD = 2.5 mm with Peek Flange |
 |
ZF2.5(F) ZF2.5(FP) |
| Metal Ferrule OD = 2.5 mm |  |
MF2.5 |
| M3 Connector |  |
CM3 |
| M3 Connector Peek Plastic |  |
CM3(P) |
| Comparison Table : Protective Jacket | |||||||||
| Composition | Code | Description | Color | OD (mm) |
Linear mass (g/m) |
Flexibility | Fiber break protection | Fiber pull protection | Proposed usage |
 |
900 | Hytrel loose tube 0.9 | Black* | 0.9 | 0.5 |
Excellent |
Low |
Low |
Cable to small freely-moving animal (mice) |
 |
1100 |
Hytrel loose tube 1.1 mm |
Black* | 1.1 | 0.5 | Excellent |
Low |
Low | Cable to small freely-moving animal (mice) |
 |
3000 | PVC jacket 3 mm | Black | 3.0 | 5.8 | Low | Good | Excellent | General use cable |
 |
LWMJ | Stainless monocoil with PVC 2.4 mm | Black | 2.4 | 7.5 | Good |
Good |
Good | Freely-moving animal light delivery with large mice or rat |
 |
PKMJ |
Stainless monocoil with kevlar and PUR 3.0 mm |
Black | 3.0 | 11 | Good |
Excellent |
Excellent | Best compromise between flexibility and robustness |
 |
ARMO | Stainless armor 2.3 mm | Silver | 2.3 | 9.2 | Low | Excellent | Excellent | Preferred for maximum robustness |
 |
ARBK | Stainless armor with PVC 3 mm | Black | 3.0 | 15 | Low | Excellent | Excellent | Preferred for maximum robustness |
* Other color available on request.
Jacket availability may vary with optical fibre type
-
The Low Autofluorescence Bundle Branching Fiber-optic Patch Cord has two or more optical fibers bundled into a single optical connector on one end and individual connectors for each fiber on the other end. It uses low autofluorescence materials and black epoxy to prevent the signal crosstalk between the optical fibers. These patch cords are primarily used in multi-site fiber photometry.
Before delivery, each patch cord undergoes a photobleaching process that further decreases its natural fluorescence.
Please note that there may be some limitations on the choice of optical fiber, connector type, or the number of branches.
-
Core
(μm)Cladding
(μm)Buffer NA Fiber-optic Code* 200 220 245 0.37 200/220/XXX-0.37 200 230 500 0.57 200/230/XXX-0.57 400 440 470 0.37 400/440/XXX-0.37 400 430 730
0.57 400/430/XXX-0.57
*XXX is representative of the jacket code, see the JACKETS CODE tab to choose the best one for your needs - Low-Autofluorescence Bundle Branching Fiber-optic Patch Cord
Comparison Table : Protective Jacket Composition Code Description Color OD
(mm)Linear mass
(g/m)Flexibility Fiber break protection Fiber pull protection Proposed usage 900 Hytrel loose tube 0.9 Black* 0.9 0.5
Excellent
Low
Low
Cable to small freely-moving animal (mice) 1100
Hytrel loose tube 1.1 mm
Black* 1.1 0.5 Excellent
Low
Low Cable to small freely-moving animal (mice) 3000 PVC jacket 3 mm Black 3.0 5.8 Low Good Excellent General use cable LWMJ Stainless monocoil with PVC 2.4 mm Black 2.4 7.5 Good
Good
Good Freely-moving animal light delivery with large mice or rat PKMJ
Stainless monocoil with kevlar and PUR 3.0 mm
Black 3.0 11 Good
Excellent
Excellent Best compromise between flexibility and robustness ARMO Stainless armor 2.3 mm Silver 2.3 9.2 Low Excellent Excellent Preferred for maximum robustness ARBK Stainless armor with PVC 3 mm Black 3.0 15 Low Excellent Excellent Preferred for maximum robustness
* Other color available on request.
Jacket availability may vary with optical fibre type -
Description Product Termination Code FC Connector with Zirconia Ferrule
FC Connector with Metal FerruleFC
FCMSMA Connector with Metal Ferrule SMA Zirconia Ferrule OD 1.25 mm ZF1.25 Zirconia Ferrule OD = 1.25 mm with Flange
ZF1.25(F)
Zirconia Ferrule OD = 1.25 mm with Peek Flange ZF1.25(FP) Zirconia Ferrule OD = 1.25 mm with Reduced Flange 1.6 mm
ZF1.25(RF) Metal Ferrule OD 1.25 mm MF1.25 Metal Ferrule OD 1.25 mm with Flange MF1.25(F) Zirconia Ferrule OD = 2.5 mm ZF2.5 Zirconia Ferrule OD = 2.5 mm with Flange
Zirconia Ferrule OD = 2.5 mm with Peek FlangeZF2.5(F)
ZF2.5(FP)Metal Ferrule OD = 2.5 mm MF2.5 M3 Connector CM3 M3 Connector Peek Plastic CM3(P) -
Application NoteFrEn Low Autofluorescence Patch Cords
ProcedureFrEn Patch Cord Photobleaching