3 ports RFMC - Single Fluorophore

3 ports RFMC - Single Fluorophore

Voici une description courte popur vouir ce que ca donne seulement... Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor

…generating

The 3 ports Rotary Fluorescence Mini Cube (RFMC) supports excitation of GFP-like fluorophores and recordings of its fluorescence. It is an add-on to the rotor of a dedicated version of our 24-channel Assisted Electrical Rotary Joint. Replacing an optical rotary joint with an electrical one increases collection efficiency and reduces motion-related signal variation.

  • RFMC has a built-in LED light source set to low excitation power.
  • The integrated detector has an amplified photodiode circuit similar to that of the Doric Fluorescence Detector.
  • An LED Driver and a Fluorescence Detector Amplifier connect to Rotary FMC via the Assisted Electrical Rotary Joint's stationary part.
  • The RFMC's are easily attached to or removed from a rotary joint. They can be ordered separately or added to an existing system.
Rotary Mini Cube
   Wavelength range   350 to 1100 nm
   Optical fiber compatibility - Core diameter 200 or 400 µm
- NA 0.37 to 0.57
   Spectral bandwidth - Excitation : 460-490 nm
- Emission : 500-550 nm
   Optical filter attenuation > OD 5 outside band
   Dimensions   57 mm x 63 mm x 26 mm
Built-in Detectors
   Detector Sensitivity - 0.38 A/W @ 550 nm
- 0.60 A/W @ 960 nm (peak)
   Amplification   3 levels : 1x, 10x, 100x
   Transimpedance gain - 2.0 E09 V / A (1x)
- 2.0 E10 V / A (10x)
- 2.0 E11 V / A (100x)
   Conversion gain
   @ 550 nm		 - 0.76 V / nW (1x)
- 7.60 V / nW (10x)
- 76.0 V / nW (100x)
   Saturation level
   @ 550 nm		 - 7.2 nW (1x)
- 0.72 nW (10x)
- 72 pW (100x)
   NEP < 12 fW/√Hz
   Bandwidth - DC : 0 - 1000 Hz
- AC : 30 - 1000 Hz
   Electrical interface   BNC
   Output Voltage   0.0 to 5.5 V
   Output impedance   50 Ω
   Sensor type   Silicon photodiode
   Sensor Area   1 x 1 mm
   Input voltage   12 V DC (power supply included)
Built-in LEDs
   Max Current   500 mA
   Emitter size   400 µm diameter - NA0.22
   Output Power
   (fibre 200  µm) 		  LED 400-410 nm = 60 µW 
  LED 460-490 nm = 90 µW
   Output Power
   (fibre 400  µm) 		  LED 400-410 nm = 220 µW
  LED 460-490 nm = 375 µW
Drawing

RFMC cube
Getting StartedFrEn

Fiberless &Wireless Optogenetically Synchronized Electrophysiology System

 

  • The 3 ports Rotary Fluorescence Mini Cube (RFMC) supports excitation of GFP-like fluorophores and recordings of its fluorescence. It is an add-on to the rotor of a dedicated version of our 24-channel Assisted Electrical Rotary Joint. Replacing an optical rotary joint with an electrical one increases collection efficiency and reduces motion-related signal variation.

    • RFMC has a built-in LED light source set to low excitation power.
    • The integrated detector has an amplified photodiode circuit similar to that of the Doric Fluorescence Detector.
    • An LED Driver and a Fluorescence Detector Amplifier connect to Rotary FMC via the Assisted Electrical Rotary Joint's stationary part.
    • The RFMC's are easily attached to or removed from a rotary joint. They can be ordered separately or added to an existing system.
  • Rotary Mini Cube
       Wavelength range   350 to 1100 nm
       Optical fiber compatibility - Core diameter 200 or 400 µm
    - NA 0.37 to 0.57
       Spectral bandwidth - Excitation : 460-490 nm
    - Emission : 500-550 nm
       Optical filter attenuation > OD 5 outside band
       Dimensions   57 mm x 63 mm x 26 mm
    Built-in Detectors
       Detector Sensitivity - 0.38 A/W @ 550 nm
    - 0.60 A/W @ 960 nm (peak)
       Amplification   3 levels : 1x, 10x, 100x
       Transimpedance gain - 2.0 E09 V / A (1x)
    - 2.0 E10 V / A (10x)
    - 2.0 E11 V / A (100x)
       Conversion gain
       @ 550 nm    		 - 0.76 V / nW (1x)
    - 7.60 V / nW (10x)
    - 76.0 V / nW (100x)
       Saturation level
       @ 550 nm    		 - 7.2 nW (1x)
    - 0.72 nW (10x)
    - 72 pW (100x)
       NEP < 12 fW/√Hz
       Bandwidth - DC : 0 - 1000 Hz
    - AC : 30 - 1000 Hz
       Electrical interface   BNC
       Output Voltage   0.0 to 5.5 V
       Output impedance   50 Ω
       Sensor type   Silicon photodiode
       Sensor Area   1 x 1 mm
       Input voltage   12 V DC (power supply included)
    Built-in LEDs
       Max Current   500 mA
       Emitter size   400 µm diameter - NA0.22
       Output Power
       (fibre 200  µm)     		  LED 400-410 nm = 60 µW 
      LED 460-490 nm = 90 µW
       Output Power
       (fibre 400  µm)     		  LED 400-410 nm = 220 µW
      LED 460-490 nm = 375 µW
  • Drawing

    RFMC cube
    Getting StartedFrEn

    Fiberless &Wireless Optogenetically Synchronized Electrophysiology System