5 ports Fluorescence Mini Cube - Two Fluorophores
5 ports Fluorescence Mini Cube - Two Fluorophores
Voici une description courte popur vouir ce que ca donne seulement... Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor
Two excitations and two detections require a 5 ports FMC optimized for the maximum transmission of detected fluorescence, the minimal cross-talk of the two fluorescence spectra, and the highest possible isolation of the detection ports from the excitation light. We currently offer Green Fluorophore (GFP-like) configurations and Red Fluorophore (RFP-like). Still, the filter set can be customized for other fluorophores on request.
Compared to Fluorescence Mini Cubes with only FC connectors on all ports, the ones with integrated photodetectors provide a 100% better signal-to-noise ratio (30% signal increase and a 40% noise reduction). Moreover, the versions with integrated LEDs reduce the number of optical connections and overall system footprint.
| Mini Cube | |
|---|---|
| Wavelength range | 350 to 1100 nm |
| Optical fiber compatibility |
- Core diameter 200 or 400 µm - NA 0.37 to 0.57 |
| Spectral bandwidth |
Green Fluorophore : - Excitation 460-490 nm - Emission 500-550 nm Red Fluorophore : - Excitation 540-570 nm - Emission 580-680 nm |
| Optical filter attenuation | > OD 5 outside band |
| Dimensions | 57 mm x 63 mm x 26 mm |
| Built-in Detectors | |
| Detector Sensitivity | - 0.38 A/W @ 550 nm - 0.60 A/W @ 960 nm (peak) |
| Amplification | 3 levels : 1x, 10x, 100x |
| Transimpedance gain |
- 2.0 E09 V / A (1x) - 2.0 E10 V / A (10x) - 2.0 E11 V / A (100x) |
|
Conversion gain @ 550 nm |
- 0.76 V / nW (1x) - 7.60 V / nW (10x) - 76.0 V / nW (100x) |
|
Saturation level @ 550 nm |
- 7.2 nW (1x) - 0.72 nW (10x) - 72 pW (100x) |
| NEP | < 12 fW/√Hz |
| Bandwidth | - DC : 0 - 1000 Hz - AC : 30 - 1000 Hz |
| Electrical interface | BNC |
| Output Voltage | 0.0 to 5.5 V |
| Output impedance | 50 Ω |
| Sensor type | Silicon photodiode |
| Sensor Area | 1 x 1 mm |
| Input voltage | 12 V DC (power supply included) |
| Built-in LEDs (ilFMC Gen.2) |
|
| Max Current | 500 mA |
| Emitter size | 400 µm diameter - NA0.22 |
|
Max Output Power (fibre 400 µm) |
LED 460-490 nm = 1.5 to 120 µW (adjustable) |
| LED 540-570 nm = 50 µW (fixed) |
|
-
Two excitations and two detections require a 5 ports FMC optimized for the maximum transmission of detected fluorescence, the minimal cross-talk of the two fluorescence spectra, and the highest possible isolation of the detection ports from the excitation light. We currently offer Green Fluorophore (GFP-like) configurations and Red Fluorophore (RFP-like). Still, the filter set can be customized for other fluorophores on request.
Compared to Fluorescence Mini Cubes with only FC connectors on all ports, the ones with integrated photodetectors provide a 100% better signal-to-noise ratio (30% signal increase and a 40% noise reduction). Moreover, the versions with integrated LEDs reduce the number of optical connections and overall system footprint.
-
Mini Cube Wavelength range 350 to 1100 nm Optical fiber compatibility - Core diameter 200 or 400 µm
- NA 0.37 to 0.57Spectral bandwidth Green Fluorophore :
- Excitation 460-490 nm
- Emission 500-550 nm
Red Fluorophore :
- Excitation 540-570 nm
- Emission 580-680 nmOptical filter attenuation > OD 5 outside band Dimensions 57 mm x 63 mm x 26 mm Built-in Detectors Detector Sensitivity - 0.38 A/W @ 550 nm
- 0.60 A/W @ 960 nm (peak)
Amplification 3 levels : 1x, 10x, 100x Transimpedance gain - 2.0 E09 V / A (1x)
- 2.0 E10 V / A (10x)
- 2.0 E11 V / A (100x)Conversion gain
@ 550 nm- 0.76 V / nW (1x)
- 7.60 V / nW (10x)
- 76.0 V / nW (100x)Saturation level
@ 550 nm- 7.2 nW (1x)
- 0.72 nW (10x)
- 72 pW (100x)NEP < 12 fW/√Hz Bandwidth - DC : 0 - 1000 Hz
- AC : 30 - 1000 HzElectrical interface BNC Output Voltage 0.0 to 5.5 V Output impedance 50 Ω Sensor type Silicon photodiode Sensor Area 1 x 1 mm Input voltage 12 V DC (power supply included) Built-in LEDs (ilFMC Gen.2) Max Current 500 mA Emitter size 400 µm diameter - NA0.22 Max Output Power
(fibre 400 µm)LED 460-490 nm
= 1.5 to 120 µW (adjustable)LED 540-570 nm
= 50 µW (fixed)